Skip to main content
Monthly Archives

April 2017

End of the 2017 Season

By FRC 2017 No Comments

Hello again from The Automatons!

10k was a wild ride. We played hard, worked hard, and definitely built hard. Unfortunately, we didn’t qualify for championships, but after ranking 19th with a 4-4-0 record we were the 9th pick for playoffs, which landed us on the 8th-seeded alliance with Blaze Robotics and QWERTY Robotics. Despite being the lowest-ranking alliance, we managed to secure a 2-0 win against the #1 seeded alliance! However, we went down in the semi-finals (again) due to our robot losing connection during a tiebreaker match.

Match Red Alliance Blue Alliance Scores
Qualifications
4664 2480 2823 2847 6709 6424 108 170
2500 2509 1816 3202 2823 2511 292 168
2823 2232 4207 6175 3630 3751 211 264
3184 2532 2823 4229 2529 3745 231 115
2181 3026 2480 3058 2823 2239 140 270
5172 2823 2545 3278 3839 2498 259 330
6176 4607 4198 3026 2052 2823 148 318
5637 3100 3244 2823 2498 3454 90 315
Quarterfinals
3026 2500 2052 3278 3184 2823 256 299
3026 2500 2052 3278 3184 2823 165 246
Semifinals
2823 3184 3278 3299 4198 2181 306 235
2823 3184 3278 3299 4198 2181 216 305
2823 3184 3278 3299 4198 2181 180 300

Besides performing a lot better than we did at Northern Lights, we also won the Innovation in Control award for our spectacular shooting mechanism that made Omnibus the best shooter there. Those that weren’t busy building or programming presented for Chairman’s and Dean’s List and did extensive scouting throughout the matches. Also, ScotBot did a bit of dancing and we got a visit from our principal, Dr. Winston Tucker!

Videos of Omni in action can be found on our YouTube page. We’re currently planning a car wash on May 13th to raise money for next year, so stop by Highland from 9-2 if you want to support us (or if your car just needs a wash).

Thanks for keeping up with us!

Follow HP Robotics on all of the official channels and share with your friends!

Website: https://www.hprobotics.org/
Twitter: https://twitter.com/HPRobotics
Facebook: https://www.facebook.com/HPRobotics/

If you have any questions feel free to contact us.

If you would like to contribute to the team, please use this link to contribute through GiveMN. Thank you!

 

Getting ready for 10k!

By FRC, FRC 2017 No Comments

Hey, everyone! Thanks for keeping up with us.

On bag day (or, for the non-robotics folk, February 21st) we finally completed our robot for this year and gave it a name. Meet Omnibus!

picture of omni

Omnibus gets its name from the fact that every component is stored inside of its box frame – besides being a name for a collection of books, omnibus is an adjective meaning “containing or including many items”. After the build process was complete, we programmed it and put it in a bag.

When we went to Northern Lights, our first regional of the year, it turned out Omnibus was slightly overweight. We had to cut a bunch of holes in its frame and get rid of some components, and because of that and our lack of drive practice, we didn’t get off to a great start. With some repairs to the robot, we managed to win 4 out of our 8 qualification matches, pulling ourselves up from last place to 28th place. Unfortunately, we didn’t make it past qualifications, but we learned a lot from the competition and made tons of improvements to our robot – and once we can legally take it out of the bag again, there’ll certainly be more to come.

Match Red Alliance Blue Alliance Scores
Qualifications
3723 2823 4786 2512 3036 2509 190 255
2491 2823 6132 3298 4665 5172 92 151
2989 2501 4859 3298 2823 3026 165 106
2518 5143 2987 6758 3130 2823 190 241
4226 3883 3313 2823 5143 2883 160 240
2502 4624 2823 6628 5232 2846 157 147
3297 6044 2823 3026 5882 2499 145 181
3367 5929 6707 4656 3754 2823 165 197

We built a shadow-bot between competitions to test code and build new mechanisms, and since we can actually test on it and make adjustments, our outlook is even better than before. Our shooter mechanism can now get 21 kPa in autonomous mode – and it’s pretty dependable.

We’ve also made improvements to our gear catching mechanism and our climber using the shadow-bot. We’ve gone from a passive gear catcher – which just catches and delivers a gear – to an active gear catcher that can actually put the gear on the spring. We also let our drive team have some much-needed practice, so now we’re pretty proficient with our robot.

 

The business team has been working hard to perfect our presentation for the Chairman’s Award – for those not in the know, the Chairman’s Award is the most prestigious award a team can possibly win. It celebrates growth as a team and promoting STEM to one’s community. Along with that they have been working to get more sponsors to allow for more events in the near future.

That’s all for now! DFTBA!

Follow HP Robotics on all of the official channels and share with your friends!

Website: https://www.hprobotics.org/
Twitter: https://twitter.com/HPRobotics
Facebook: https://www.facebook.com/HPRobotics/

If you have any questions feel free to contact us.

If you would like to contribute to the team, please use this link to contribute through GiveMN. Thank you!